Another type is the flax wheel, which makes use of a double-drive wheel that is usually used with a distaff for spinning other kinds of fabric, especially linen. The next types are the Saxony wheel and the upright wheels, which are somewhat a little similar to one another. They both have all-purpose wheels that are driven by a treadle for spinning worsted-spun yarns. Take the starter yarn through the hook or notch at the drop spindle top. A top whorl drop spindle can hang from the starter yarn. A spindle, will do similarly in the end, although you need to rest it on a table to prevent falls. The lower hand will turn the drop spindle and let go of the twist. The upper hand will hold the fiber, slowly preparing it to turn into yarn, then prevent the twist from moving right into the fiber fore you spin. Its origin The idea started off with a metal frame that has eight spindles made of wood at one of its ends. Eight of its rovings were actually attached to the beam of the frame. When these rovings are extended, they are able to pass through some horizontal bars that are made of wood which are all clasped to one another. This means that that particular person can now have the skill of choosing the perfect yarn for a certain project. Spinning as form of meditation Furthermore, the act of spinning itself is regarded by many as a peaceful, very soothing, and meditative process once it is correctly learned. Also, purchasing a fiber that has already been prepared is a lot cheaper as compared to purchasing ones that have been spun using commercial techniques and machinery. As the spinner makes new yarn, the bobbin and flyer can turn in unison, but the spinner may choose to wind the yarn onto the bobbin. The flyer or the bobbin will slow down and then the yarn winds on. A part will slow down due to the brake band looping over the element. If the brake band is tight, the pull on the yarn increases, since there is more friction on the bobbin that needs to be overcome to turn together with the flyer. They will find that extremely fine wool fibers are very slippery and might be harder to control until they get more experience. The twist may also be hard for most beginners. To start, you will need a spinning wheel and fiber. A lot of spinning wheels have 3 or 4 bobbins. These are generally used to ply yarns.