You can add more twist by turning the spindle before you make new lengths of yarn. You can provide another twist to the spindle. Twist the spindle another time and provide your right hand back to where the left is holding the yarn. Move the left hand back 3 inches, the pull and draft more wool fibers to let the spindle turn around. Today, there are new machines that can relatively make the work easier. The technique, however, remains very much unchanged despite the trends and other contemporary designs that have been recently introduced. It is vital that you first understand what each activity is to determine if it is right for you. This is referred to as the bottom-whorl spindle or low-whorl. Drill a small hole at the shaft center. Experts recommend that you use a 5/64 drill bit. Buy a cup hook measuring 1/4 inch then screw it right onto the shaft top. This will be the catch of the yarn to prevent it from slipping off the end as you spin. The twist glides behind the lower hand to produce yarn successfully. Spinning Tips The hands will repeat the pinch, pull and slide motions, while the lower hand will sometimes reach down to rotate the spindle. When you practice, you will feel the constant motion. The yarn will be strong enough to support the movement. The fiber will be held by the left hand while the wheel is slowly turned with the control of the right hand. According to expert seamstress, the fiber should be held at a particular slight angle to the spindle so that there is a wonderful and noticeable twist. After spinning the yarn, it should be wound right onto the spindle by moving the fiber like as if forming a right angular shape with the spindle. Men during the stone age continued making strings and threads for various reasons. These strings had various sizes and were laced and knotted together to create several functional items, like home covering and clothes. A lot of weavers today still use the technique of finger weaving, wherein threads are knotted and laced together using only the hands.